If your garage door is in need of an upgrade, it might be time to repaint it. You can get help from a painter and decorator or do it yourself. The best way to prepare for painting is to clean the garage door thoroughly first. Make sure to apply a natural degreasing agent to the door to help the new paint adhere. Use light grit sandpaper to remove loose paint pieces. Do not sand the old paint – you’ll only end up scratching it.
Begin by painting the top panel of the door. Begin by painting the top corner, and continue around the perimeter. Next, paint the inside of the door frame. You can also use a brush to paint the side edges of the door. Afterward, wipe off any excess paint.
If the paint is peeling or the door is sagging, you might want to sand it first. Sanding will remove the glossy finish and make the paint adhere better. However, do not sand through the thin layers of primer, because you may end up removing some of it. Make sure to cover any thin spots, and leave the door overnight to dry. This way, you’ll get the most even coverage. If you need repairs doing first, consider Milton Keynes Garage Door Repairs at a site like garagedoorsrus.co.uk/garage-door-repairs-milton-keynes/
Before you begin painting your garage door, remember to check whether it has lead-based paint. If you’re planning to sand the old garage door, you’ll want to make sure that there’s no lead paint on it, since lead paint dust and chips can cause serious problems if swallowed or inhaled.
Before you begin painting, you should first remove any dirt that’s stuck on the door. It’s important to remove all debris, including cobwebs and dirt. You can also clean it by using a pressure washer, but it’s important to be careful because too much pressure can cause damage to wood and metal. Also, remember that if you use too much pressure, you could dent the door or damage the primer coat. To prevent uneven edges, make sure to use a wide roll of tape.
When repainting an old garage door, make sure to follow the manufacturer’s instructions. One coat is sufficient for basic paint jobs, while several coats are necessary for more vibrant hues and lighter colours over darker ones. The paint should be allowed to dry completely after each coat before applying the next. Then, it’s time to put away the paintbrushes and allow the door to cure.
